Minelab GPX 5000 Specification
Application - Gold Prospecting & Deep Relic
Technology - MPS, DVT & SETA
Frequency/Transmission - Bi-Level, Advanced Pulse Induction
Coil (standard) - 11" Round Double-D plus 15 x 12-inch Monoloop.
Audio Output - 6.35mm (1/4") headphone/speaker jack.
Headphones Supplied - Koss 100 ohm headphones.
Visual Display - 64 x 128 pixels, transflective with white backlight.
Backlight - Yes with adjustable automatic 'time-out'.
Product ID - 23149
USB Connectivity - N/A
Memory - Setting changes saved automatically and remain until changed or reset. Factory Presets can be restored on start-up.
Depth Indication - N/A
Detect Modes - General, Deep, Hi-Mineral, Patch, Hi-Trash & Pinpoint (all user programmable)
Discrimination - Iron Reject: range 1 to 10 & Off (All Metal).
Timings - Normal, Sensitive Extra, Enhance, Sharp, Sensitive Smooth, Coin/Relic, Salt/Gold & Fine Gold.
Audio tone - Variable Control 1 to 100.
Audio Type - Quiet, Normal, Deep & Boost.
Ground Balance - Automatic Ground Balance, Fixed & Tracking: Slow, Medium & Fast. Quick-Trak button.
Ground Balance Type - General, Specific & Ground Balance Off.
Trash Density - N/A
Pinpoint - N/A
Sensitivity Adjust - Rx Gain 1 to 20.
Tune / Noise Cancel - Automatic & Manual 0 to 255.
Threshold - Adjustable turn control.
Target Volume Adjust - Target Volume 1 to 20. Volume Limit 1 to 20.
Battery - Lithium-ion rechargeable battery 68Wh with in-built amplifier for speaker use. Approx. 12 Hours use. Supplied with mains and vehicle charger.
Low battery alert - Audio alert.
Length - 1100mm (43.3”) à 1300mm (51.2”).
Weight - 2.4kg (5.3lbs) including 11” coil (excluding battery and accessories). Battery weight 780g (1.7lbs).
Warranty - 3 years control box & coil.