LOADING IMAGES

COILTEK 14" ELITE COIL

$521

+ Freight Cost  

$35.00

Coiltek 14" Mono Elite Coil 

NEW Camoflage Design

The New Innovation from Coiltek Manufacturing.

New Coiltek 14" Mono Elite coil for the Minelab SD, GP and GPX series of detectors. New innovative mono configuration using LITZ wire, super sensitive with excellent stability.
•CONFIGURATION: New innovative Mono Coil
•SIZE: 14" / 350mm round
•Weight: 1130 gms / 40 ounces approx 
•Suits the Minelab SD / GP / GPX detectors.
•Extremely sensitive and quiet in operation
•Sharp and bright response to targets
•Water resistant
•Deep searching
•Tests consistently achieving 1-2 inches greater depth than the standard 14" Mono by Coiltek
•Optimises the SD, GP and GPX detectors performance.

Testimonials:

They are a great coil, had a demo one out for a weekend with Hermann Steffen and Graham Ashton a few weeks back. Both put their names down for one. Didn't test it against the Goldstalker but did against the Nuggetfinder 14" and 12" adv. on an ugly 1oz. Put it at a depth where the 12" NF just couldn't get it and the 14" NF would only pull you up if gridding or knew it was there. It gave a clear signal that there was something there on the first swing using the Elite. It gave my GPZ a good run as the main diff was the smoother threshold on the Z running audio smoothing high, signal being very clear even quite a few inches above the ground whereas the Elite dropped off a bit quicker. I was impressed with the Elite as it did run nice and quiet on the 5000 so I might even have to get one. - Mariusz Godecki

I had the opportunity over the Easter weekend to test the new Coiltek 14" Mono Elite coil on my GPX5000. The coil ground balanced quickly and was stable and quiet. I was working on rocky ground and the coil didn't false when hitting rocks or being pushed under bushes. I found the coil to be extremely sensitive to small nuggets at depth. I located a 0.5gm nugget at 250mm and a 1.4gm nugget at 300mm. Nuggets down to 0.03gms were recovered. The new coil clearly indicated a 0.5 nugget that the standard 14” mono didn't recognise. I am very impressed with the new 14" Mono Elite it will now become my go to coil for this type of ground. - Trevor Clark

 

 


Read More   

Availablity : 99 Items



Quantity :

 

Coiltek 14" Mono Elite Coil 

NEW Camoflage Design

The New Innovation from Coiltek Manufacturing.

New Coiltek 14" Mono Elite coil for the Minelab SD, GP and GPX series of detectors. New innovative mono configuration using LITZ wire, super sensitive with excellent stability.
•CONFIGURATION: New innovative Mono Coil
•SIZE: 14" / 350mm round
•Weight: 1130 gms / 40 ounces approx 
•Suits the Minelab SD / GP / GPX detectors.
•Extremely sensitive and quiet in operation
•Sharp and bright response to targets
•Water resistant
•Deep searching
•Tests consistently achieving 1-2 inches greater depth than the standard 14" Mono by Coiltek
•Optimises the SD, GP and GPX detectors performance.

Testimonials:

They are a great coil, had a demo one out for a weekend with Hermann Steffen and Graham Ashton a few weeks back. Both put their names down for one. Didn't test it against the Goldstalker but did against the Nuggetfinder 14" and 12" adv. on an ugly 1oz. Put it at a depth where the 12" NF just couldn't get it and the 14" NF would only pull you up if gridding or knew it was there. It gave a clear signal that there was something there on the first swing using the Elite. It gave my GPZ a good run as the main diff was the smoother threshold on the Z running audio smoothing high, signal being very clear even quite a few inches above the ground whereas the Elite dropped off a bit quicker. I was impressed with the Elite as it did run nice and quiet on the 5000 so I might even have to get one. - Mariusz Godecki

I had the opportunity over the Easter weekend to test the new Coiltek 14" Mono Elite coil on my GPX5000. The coil ground balanced quickly and was stable and quiet. I was working on rocky ground and the coil didn't false when hitting rocks or being pushed under bushes. I found the coil to be extremely sensitive to small nuggets at depth. I located a 0.5gm nugget at 250mm and a 1.4gm nugget at 300mm. Nuggets down to 0.03gms were recovered. The new coil clearly indicated a 0.5 nugget that the standard 14” mono didn't recognise. I am very impressed with the new 14" Mono Elite it will now become my go to coil for this type of ground. - Trevor Clark